Jun 28, 2008

Phone Unlocking for All Mobilephones

SPECIAL Phone Unlocking for All Mobilephones

YOU WILL GET OVER 200 SOFTWARE CALCULATERS GIVING YOU THE CODES TOUNLOCK 100`S OF MOBILES AND ALSO SOFTWARE TO UNLOCK VIDEO ON AMOTROLOLA V3

COMPATIBLE WITH "MOST" MOBILE HANDSET'S
Motorola, Samsung, Nokia, Ericsson, Sony, Sharp, Toshiba - Plus Loads More!
Most phones will need a data cable to connect your Handset to the PC.

Ericsson: (virtually all models covered)
Mitsibushi: (virtually all models covered)
Motorola: (virtually all models covered)
Nokia: (virtually all models covered)
Panasonic: (virtually all models covered)
Philips: (virtually all models covered)
Sagem: (virtually all models covered)
Siemens: (virtually all models covered)
Sony: (virtually all models covered)
Samsung: (virtually all models covered)
Sharp: (Inc. GX's) (virtually all models covered)
LG: (virtually all models covered)
NEC: (virtually all models covered)

Download part 1? click here


Download part 2? click here

published by: www.unlock4mobile.blogspot.com

Jun 27, 2008

X530,x510,c300,e250 Free Unlock Solution

FOR C300 === USE E700 COM CABLE

FOR E250 === USE D800 COM CABLE

NEVER USE USB CABLE ON THESE PHONE ...

Download it? click here

published by: www.unlock4mobile.blogspot.com

Samsung SGH-600 / SGH-2100

Secret Codes - Samsung SGH-600 / SGH-2100

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

Samsung 811


47*869#08#9

- unlock code / change roaming code / ID

published by: www.unlock4mobile.blogspot.com

Samsung Easy Unlocker

Easy Unlocker - Remote Update Client (v1.21) 99%

Download it? click here


published by: www.unlock4mobile.blogspot.com

Jun 25, 2008

NOKIA Unlock codes 6110/6120/6130/6150/6190

NOKIA Unlock codes 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330 unlocks
*#06# This will show your warranty details *#92702689#
*3370# Basically increases the quality of calling sound, but decreases battery length.
#3370# Deactivates the above
*#0000# Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370# Half Rate Codec activation. It will automatically restart
#4370# Half Rate Codec deactivation. It will automatically restart

Restore Factory Settings To do this simply use this code
*#7780# Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you'll bepresented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code To check the ISDN number on your Nokia use this Free nokia Unlock code *#92772689#.::

As I tried to collect most common Unlock code for mobile phones.It may not work with some models.

published by: www.unlock4mobile.blogspot.com

Samsung / Nokia Simple tricks unlocker

Unlock Codes for Mobile Phones- free Nokia Samsung Unlocks

NOKIA
cell phone code :These Free Nokia Unlock codes will work on most Nokia Mobile Phones
(1) *#06# For checking the International Mobile Equipment Identity (IMEI Number).
This is useful when your mobile is lost or stolen.Free Motorola and Samsung Unlock codes are in another post.

If u find any difficulty to understand this Unlock code for Mobile Phones please write in comment section.
2) *#0000# Displays your phones software version,
1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favorite )
(3) *#9999# Phones software version if *#0000# does not work.
(4)*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%



If mobile is locked you can check by this way

(8) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

published by: www.unlock4mobile.blogspot.com

All in 1 unlock software

Nokia Security unlocker Easy Calculator "Unlock with PC / or mobile sis calculator."

IMEI for calculate Use *#06#

List of the supporting models Nokia: 2100, 2650, 3100, 3120, 3200,
3210, 3220, 3230, 3300, 3310, 3315, 3330, 3350, 3360, 3390, 3395,
3410, 3510, 3510i, 3520, 3650, 3660, 5100, 5110, 5130, 5140, 5146,
5190, 5210, 5510, 6020, 6021, 6030, 6090, 6100, 6101, 6102, 6108,
6110, 6130, 6170, 6200, 6210, 6220, 6225, 6230.6230i, 6250, 6260,
6310, 6340, 6360, 6370, 6500, 6510, 6590, 6600, 6610, 6610i, 6620,
6650, 6670, 6800, 6810, 6820, 7110, 7160, 7190, 7200, 7210, 7210i,
7250, 7250i, 7260, 7270, 7280, 7600, 7610, 7650, 7700, 7710, 8210,
8250, 8270, 8280, 8290, 8310, 8390, 8510, 8800, 8810, 8850, 8855,
8890, 8910, 9000, 9110, 9210, 9290, 9300, 9300i, 9500, to N- eider and
to N- eider QD
The models of platform bb5 (3250, 6131, 6133, 6125, 6126, 6270,
6280, 6282, 6630, 6680, 6681, 6682, 7370, E60, E61, N70, N70, N72,
N80, N90, N91, N92) in the case of user blocking by the code not
razblokirovyvayutsya. You are turned to the service center.



info On Unblocked Nokia

CODE
http://www.mediafire.com/?awux2y1fadt


nokia unlocker

Download:
http://www.mediafire.com/?3zqm9fgyao2


nokia-unlocker.sis.

Download:
http://www.mediafire.com/?caeg2fbwy20


WorldUnlock

Download:
http://www.mediafire.com/?22l0guntkyh


Alcatel [SP-Lock Remover]

Download:
http://www.mediafire.com/?29dj4jzteym


Alcatel [Code Generator]

Download:
http://www.mediafire.com/?1byqypbgmm0


Bosch [Universal UnLock]

Download:
http://www.mediafire.com/?2o27yosfdby


DK2 DESkey Drivers

bdk2wn32.part1

Download:
http://www.mediafire.com/?fnx4m4gjgzy


bdk2wn32.part2

Download:
http://www.mediafire.com/?2iwzvwnehln


bdk2wn32.part3.

Download:
http://www.mediafire.com/?5n0y1hymu2i


Dump Utility

Download:
http://www.mediafire.com/?bsnddyp1e4v


Ericsson [HSS]

Download:
http://www.mediafire.com/?9ztjddjf8yd


Ericsson [MusicBox]

Download:
http://www.mediafire.com/?2gy3jvmxm9j


Ericsson [prt-efp1]

Download:
http://www.mediafire.com/?32z4guxx2jd


Ericsson [Serial UnLock]

Download:
http://www.mediafire.com/?94y0ppwopw1


Ericsson [Service Software]

Download:
http://www.mediafire.com/?5yyybtj11gm


Ericsson [Show All Locks]

Download:
http://www.mediafire.com/?5zugxh4ihy3


Ericsson [Test Melodies]

Download:
http://www.mediafire.com/?eojzxu9zk8d


Ericsson [UnLock All]

Download:
http://www.mediafire.com/?dgvnvuzi9d3


Sony [EEProm UnLock]

Download:
http://www.mediafire.com/?9wdhyskxtm2


WindowsCE Modem

Download:
http://www.mediafire.com/?1gx3jdyxmxy


Universal UnLock

Download:
http://www.mediafire.com/?ci2nlufy24z


Motorola [ACE]

Download:
http://www.mediafire.com/?fml3dewxcjw


Motorola [StartUp Logos]

Download:
http://www.mediafire.com/?79x1lzncnms


Sagem [NCK Calculator]

Download:
http://www.mediafire.com/?2kjmyummfwe


Sagem [EEProm Dumps]

Download:
http://www.mediafire.com/?7i5ytbnhdxz


Siemens [UnLock 1]

Download:
http://www.mediafire.com/?c0vkijvdjd2


Siemens [UnLock 2]

Download:
http://www.mediafire.com/?bqema9jscwe


Siemens [EEProm Dumper]

Download:
http://www.mediafire.com/?bfmtdxlvkin


Siemens [EEProm Dumps]

Download:
http://www.mediafire.com/?amiimirhzbn


Siemens [S-AG]

Download:
http://www.mediafire.com/?6lzmmdcz5mn


Philips [UnLock]

Download:
http://www.mediafire.com/?0ydcdfhlzjn


Philips [EEProm Dumper]

Download:
http://www.mediafire.com/?50kzmi9juxd


Philips [Editor]

Download:
http://www.mediafire.com/?3yzzzhjmt0i


Panasonic [EEProm Dumper]

Download:
http://www.mediafire.com/?etdj7nocxl1


all nokia phone unlocker.part1

Download:
http://www.mediafire.com/?ernmgmzlz02


all nokia phone unlocker.part2

Download:
http://www.mediafire.com/?5b1rm43utm4


all nokia phone unlocker.part3

Download:
http://www.mediafire.com/?emit25rcm0y


n-imei5161

Download:
http://www.mediafire.com/?etggzolxmjn

published by: www.unlock4mobile.blogspot.com

Nokia Series 40 / 60 Reset Codes

Nokia Series 40 and Series 60 Reset Codes

Here are the reset codes I have collected:

Nokia Series 40 and Series 60 Reset Codes:

Full Reset: (clears everything off the phone memory!! Be sure to back up your contacts!!): *#7370#, 12345 and then Yes.

Soft Reset: *#7780#, 12345 and then Yes. (Also works on Nokia S40 phones, NOTE: On the 6230/6230b, same as going to the Factory Reset option under Settings!! Thanks to Tris for the headsup!!)

*#335738#
*#delset#

This deletes the Email, GPRS, MMS settings that cannot be erased via phone options. (Series 40 phones only)

Nokia 9300 (not confirmed) and Nokia 9500 (based on link below):

1. Turn off phone and take out battery
2. Insert battery, and while it boots up press and hold Ctrl + Shift + F
3. After a few seconds you will be asked if you want to format or cancel

http://www.howardforums.com/showthr...threadid=580322


Nokia Series 40 and Series 60 Reset Codes:

http://www.howardforums.com/showthread.php?t=640135

Prepaid Options for Abroad:

http://www.prepaidgsm.net
http://www.howardforums.com/showthread.php?t=622551

Worldwide GPRS settings:

http://www.access-sys-eu.com/GPRS_Settings.95.0.html

published by: www.unlock4mobile.blogspot.com

Nokia 6280 unlock ( Tested! )

If you can make a log file with out using dijan software then hear is the solution they will unlock 6280 tested


Download:
http://www.mediafire.com/?dlbmmixmca7

Download:
http://www.mediafire.com/?dmyyrhz4cny

Download:
http://www.mediafire.com/?empdji14hdg

published by: www.unlock4mobile.blogspot.com

Nokia Secret Code

*# 06 # Seriel number/IMEI indicates (actually also a GSM is code - see further below)
-----------------------------------------------------
*# 0000 # SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
---------------------------------------------------------
*# 2820 # Bluetooth (BT) device address indicate
------------------------------------------------------------
xx # Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
---------------------------------------------------
[hide]A/from key Short pressing for menu for switching between profiles
------------------------------------------------------------ -------
Menu key Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
------------------------------------------------------------ ------
Menu quick access Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).
------------------------------------------------------------ ---------
Autostart go around When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
------------------------------------------------------------ ------------
# Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
------------------------------------------------------------ -------------
12345 ... is according to standard set the Nokia nokia-Sicherheitscode.
------------------------------------------------------------ --------
0000 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
------------------------------------------------------------ ------------
0 - for a long time press If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.
------------------------------------------------------
Caution - starting from here the codes are "dangerous"

*#7370925538#
* # of res wallet # ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.
------------------------------------------------------------ -----
*# 7780 # The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various "attitudes" are away - among other things these:
·1 Points of entrance (Provider dependent points of entrance and attitudes)
·2 Bluetooth attitudes
·3 Favorite
·4 Allocation of the two keys (beside Navi keys) in the main menue
·5 Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
·6 SMS/MMS/E Mail attitudes
·7 Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...
Also the sicherheitscode remains.
This putting back goes also via menu under "attitudes - general - original telephone once.".
------------------------------------------------------------ -------------
*# 7370 # Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!
This is "only" a soft format... Hard format with "green, 3, *"... see below.
------------------------------------------------------------ --------
Green, * 3 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!

Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting" on the display appears...
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and again try.
"only" virtual the memory is generally cleared - genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed.
---------------------------------------------------------
Mixed * # 92702689 #, then switch - system menu off (goes with me not)

The following code do not fold (with me also):
* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)
# EFR0 # (# 3370 #) EFR switch off
* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)
# HRC0 # (# 4720 #) HRC switch off
------------------------------------------------------------ ----
SIM LOCK Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)
# pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status
# pw+ 1234567890 +3 # Country LOCK status
# pw+ 1234567890 +4 # Sim Card LOCK status
The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc....
Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can purged. I take over for it no adhesion or responsibility!
------------------------------------------------------------ ------------
GSM code ... should function at each Handy - however Netz(betreiber)abhaengig are... and "harmless"...
Generally applies: First enter code, "send" afterwards (< send green key > press) and one moment wait...
------------------------------------------------------------ ------
SMS Tipps To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list .
For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports...
------------------------------------------------------------ ----
Mark more simply To Tipps & cheat to the topic "mark" e.g. with SMS entrance.
Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick downward.
--------------------------------------------------------
Call number transmission * 31 # - { CLIR - Calling LINE identification Restriction switches on for the general call number transmission }
# 31 # - switch off the general call number transmission
# 31 # [ telephone number ] - with the next call suppress the own call number (thus temporary)
* 31 # [ telephone number ] - with the next call transfer own call number (thus temporary)
* # 31 # - status query (of call number transmission)
# 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energised of the Netz(betreiber).)

* 30 # - switch { TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller }
# 30 # - switch off
* # 30 # - status query

This also partly goes with 6600 via Men: Attitudes - calls - own No. send...

The following codes are not supported by most Netz(betreibern):
* # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) { COLP - COonnected LINE identification presentation }
* 76 # - switch on
# 76 # - switch off

* # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) { COLR - COnnected LINE identification Restriction }
* 77 # - switch on
# 76 # - switch off
------------------------------------------------------------ ------------
Call bypasses (call Forwarding) Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupies

U=61, 62, 67 can be parallel active

U=21 - > and then no more call signaling overwrites U=61,62 and 67!
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left


** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services

Call bypasses (call Forwarding)
01.01.04 Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupies

U=61, 62, 67 can be parallel active

U=21 - > and then no more call signaling overwrites U=61,62 and 67!
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left


** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services

## U ** D # - switch bypass off (individual bypasses and service code)
Without ** D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)

* # U ** D # - status of the bypasses query:
Input without ** D queries all services and bypasses

Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter
Goal call number (e.g. D2-Netz: +49,172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter.

Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] #

This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...

----------------------------------------------------------
Knock/stops/parks/faults Knocks is signaling a secondary call during a current discussion
* 43 # - switch on
# 43 # - switch off
* # 43 # - status query

This also partly goes with 6600 via menu: Attitudes - calls - knocking...

0 < sends > - reject while the discussion a knocking
1 < send > - discussion terminate, knocking discussion accept
certain discussion (y) terminate 1 (y) < send >
2 < sends > - discussion park, knocking discussion accept
certain discussion and new discussion leads 2 parks (y) < sends >

0 < sends > - caller the busy condition signal

This also partly goes with 6600 via menus existing during the discussion.
----------------------------------------------------
Call barrier Possible only if bypass of the service code is switched off.
Check code (S):
S=33 all outgoing transmissions
S=331 outgoing abroad
S=332 outgoing abroad except home
S=35 all arriving transmissions
S=351 all arriving abroad

Special check codes (s) delete:
Switch off only in connection with the procedure
S=330 check code status outgoing & arriving transmissions switch off
S=333 check code status outgoing transmissions switch off
S=353 check code status arriving transmissions switch off
Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT ton of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 data packet exchange links incl. PADs
D=27 services thru PADs
D=29 12 Kbps digital link


* S * [Passwort] * D # - einschalten der Anruf-Sperre
# S * [Passwort] * D # - ausschalten der Anruf-Sperre
*# S # - Status der Anruf-Sperre abfragen

Passwort für Handy Sperre ändern:
** 03 ** [altes Passwort] * [neues Passwort] * [neues Passwort wiederholen] #
** 03 * 330 *[altes Passwort] * [neues Passwort] * [neues Passwort wiederholen] #

Dies geht beim 6600 auch teilweise via Menü: Einstellungen - Anrufsperre ...
------------------------------------------------------------ ----
PIN ändern ** 04 * [alte PIN] * [neue PIN] * [neue PIN wiederholen] #
** 042 * [alte PIN 2] * [neue PIN 2] * [neue PIN 2 wiederholen] #

PIN entsperren: ** 05 * [PUK] * [neue PIN] * [neue PIN wiederholen] #
PIN 2 entsperren: ** 052 * [PUK2] * [neue PIN 2] * [neue PIN 2 wiederholen] #

Dies geht beim 6600 auch teilweise via Menü: Einstellungen - Sicherheit - Telefon und SIM
-----------------------------------------------------
Diverse Codes Die folgenden Codes klappen nur in einigen (wenigen) Netzen/Netzbetreibern ... leider z.B. nicht im Vodafone D2 Netz (in Deutschland):
*#100# - Eigene Nummer (Own Number)
*#101# - HLR Nummer
*#102# - Switch Nummer
*#103# - Zeit im Netz (Network Time)
*#104# - Anrufbeantworter Nummer (Voice mailbox number)
*#105# - Switch number
*#147# - Letzter Anrufer (Last Caller)

#646# - Minutes Used: (646 spells 'MIN')
*#1345# or *174# - Vodafone Prepaid balance

*78 - Do not disturb - nur in Nord America in GSM und CDMA Netzen möglich
*79 - Cancel (s.o.)
---------------------------------------------------
CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.



There are 4 different locks on your Nokia phone.

COUNTRY-LOCK

NETWORK-LOCK

PROVIDER-LOCK

SIMCARD-LOCK

The code to read out the sim-lock status of your phone is



#PW+(MASTERCODE)+(Y)#

# = DOUBLE-CROSS

W = PRESS "*" THREE TIMES

P = PRESS "*" FOUR TIMES

+ = PRESS "*" TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO
-------------------------------------
THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.
-----------------------------------------------------
Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)
---------------------------------------------
To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

Serial number (IMEI)

Production date (MM/YY)

Purchase date (MM/YY) You can only enter the date once.

Date of last repair (0000=No repair)

Transfer user data to another Nokia phone via Infra-Red

NOKIA 6110/6120/6130/6150/6190


IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #


NOKIA 3110


IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #


NOKIA 3330

*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours,
ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code *#92772689# .::

published by: www.unlock4mobile.blogspot.com

unlock Motorola V80, V220, C450, C550, C650

To unlock a Motorola V80, V220, C450, C550, C650 you'll need to download the free software, and use a USB datacable. This will bypass the need for a subsidy code. There are 3 steps:

1. Plug in Motorola Phone and connect to computer. When prompted, install the drivers included in the download package, win98 or winXP.

2. Put phone into flash mode, by following the instructions in the software, click download for the software:

DOWNLOAD:
http://link-protector.com/136198/

3. Click Connect phone in flash mode, then unlock.

Your phone should now be unlocked, if it isn't you'll need to purchase a Motorola Subsidy code.

published by: www.unlock4mobile.blogspot.com

UNLOCK MOTOROLA free

FREE UNLOCK MOTOROLA w220 c168 c168i v690 v878 MPx200 MPx220 v872 a668

Use for unlock Cable for T191

Download:
http://rapidshare.com/files/42134680/MST_V1_1__1_.2.4_Setup.rar

published by: www.unlock4mobile.blogspot.com

Lg Multi Unlocker

just download the file below ( virus safe )
this is all instructions how to enter code after received unlock code from your device...

For the next models u must to insert the original SIM:

LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#

After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

For next models insert one SIM ,not the original SIM:

LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter NCK and press OK.

Multi Unlocker

Download:
http://www.mediafire.com/?afzzbtdndpz

published by: www.unlock4mobile.blogspot.com

Lg unlocker - see your compatible model

Firmware for: LG u250 - u450 - u960 - u970

Download:
http://pmbforum.forumcommunity.net/?t=9856501


Firmware for: LG u880 u890 u900 u300 u310 u830 KU950...

Download:
http://pmbforum.forumcommunity.net/?t=2892938


Repair for All Qualcomm LG : Tutorial how to Repair All LG Qualcomm Based

Download:
http://pmbforum.forumcommunity.net/?t=3345197


All Lg Qualcomm Flasher in one Pack

Download:
http://pmbforum.forumcommunity.net/?t=9177834


How To Flash with LGMDP

Download:
http://pmbforum.forumcommunity.net/?t=3305697


Codes, Secret and other: Here

Download:
http://pmbforum.forumcommunity.net/?t=3290721


LG U890 - U300

Download:
http://pmbforum.forumcommunity.net/?t=9015886


LG U310

Download:
http://pmbforum.forumcommunity.net/?t=10323788


Lg u900 - v11 included

Download:
http://pmbforum.forumcommunity.net/?t=4121386


LG u880

Download:
http://pmbforum.forumcommunity.net/?t=3322066


How To Lock in 2g Mode: HERE

Download:
http://pmbforum.forumcommunity.net/?t=8458568

published by: www.unlock4mobile.blogspot.com

Lg unlock code/Instruction

How to Unlock LG (most models):

1:Insert not-allowed SIM card
2 ower on the handset- phone will display "phone restricted"
3:Select "Cancel" - phone will display "phone restriction code"
4:Enter the SIM unlock code
5:Select "OK" - the handset is now successfully unlocked

How to Unlock LG KG245 (Vodafone Australia)

1:Insert a Vodafone Australia working SIM card.
2:Ensure the phone is charged and then switch the phone on.
3 ptional Step: If the SIM card has a PIN, enter your PIN number
4:Wait for the phone to power up then enter 2945#*7101#
5:Select Menu , then go to Settings > Security > SIM Lock > Network
6:Select Deactivate and enter the 8-digit unlocking code provide for your handset.
7:The handset will be unlocked automatically and will display “Done”. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

How to Unlock LG KG800 or TG800 Chocolate:

1:With the phone in standby, enter 2945#*7101#. This will activate the extra menu.
2:Go to: Settings>Security>SimLock>Network

3:Select deactivate. Enter the unlock code,

How to Unlock LG C2000:

Insert non-Cingular SIM card

1 ower on the handset - phone will display "phone restricted"
2:Select "Cancel" - phone will display "phone restriction code"
3:Enter the SIM Unlock code
4:Select "OK" - the handset is now successfully unlocked

How to Enter Unlock Codes on LG F2250:

1:With allowed sim card in the start menu type: 2945#*3311#.
2:Handset shows saved, then return to startup screen
3 ress Menu key, choose Settings > Security > Sim Lock> Network eactivate, handset will now show 'Enter NCK'
4:Enter your unlock code and OK.


How to Enter Unlock Codes on LG U8150:

1:Switch ON your phone with a not allowed SIM card.
2:Compose: 277634#*#.
3:Go to menu "SIM Lock".
4:Enter the unlock code, which you can buy any online store .

How to Enter Unlock Codes on LG U8110:

1:With a not allowed sim card in your phone enter Pin code then validate, type: 277634#*#
2:Select 'Sim Unlock' menu #
3:Enter NCK code then validate
Your phone is now unlocked.

How to Enter Unlock Codes on LG U8210:

1:With a not allowed sim card enter Pin code then validate, type: 277634#*#
2:Shows test menu
3:Choose sim test menu and type: 2945#*#, choose Sim Unlock menu
4:Handset shows 'Enter NCK'
5:Enter code, then hit OK.

How to Enter Unlock Codes on LG U81xx:

1:To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#
2:Enter the code
In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#.

How to Enter Unlock Codes on Cingular AT&T LG CU500

1:Insert non-Cingular SIM card.
2 ower on the handset. Phone will display "Invalid SmartChip"
3IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4:In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5:Enter the 8 digit SIM unlock code, which you can buy any Oline phones.
6:Select "OK". The handset is now successfully unlocked

How to Enter Unlock Codes on all other LG cell phones:
Switch ON your phone with an allowed SIM card
Then compose:
2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 & B1200)
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)
Go to "Menu" and then to "Settings"
Then select "Security"
To finish select "Network Provider" and select "Deactivate"
Enter the unlock code, which you can buy Online store unlock-cell-phones.

If your cell phone is not listed, please follow instructions for LG C2000 above

How to Enter Unlock Codes on all other LG U400 Shine (2 codes needed)

1:Insert the network SIM in the handset which works with the phone (from the locked carrier).
2:Enter 2945#*88110#.
3:The phone will then prompt 'Unlock sim'. Press OK.
4:The phone will then prompt 'Network Unlock'. Press OK.
5:The phone will then prompt- 'Input Network Control Key'. Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code. If you received a 16 digit code, enter it. The phone will have space for it.
6:It should give you the message: Success.
7:Come back to the main screen and Enter 2945#*88110#.
8:The phone will then prompt unlock sim. Press OK.
9:The phone will then prompt Network Unlock/ Lock but if you scroll down
10 :you will see a message Enter SP Lock. Enter SP Code.
Then press OK.

How to Enter Unlock Codes on all other LG KE970 Shine:

1:Switch ON your phone with an allowed SIM card
2:Then compose: 2945#*9701#
3 ress CALL.
4:It should you ask you for the code.


How to Enter Unlock Codes on all other LG TU720 Shine:

1 ut in a non-allowed SIM, phone says invalid SIM card
2:Now enter *#865625# then enter your 16 digits code.


How to Unlock LG KG800 Chocolate Without a Code (not reliable)

1:Insert SIM from the network that it is locked to.

2:Turn on phone.

3 n home Screen, slide up phone.

4:Type 2945#*#

5:ENG. Mode menu should appear.

6:Go Down to Factory Reset. Select it. May take a few minutes to reset!

7:This will reset the phone back to before the phone was locked to a network.

8:The phone will automatically restart (the network logo at start up will not change).

9:Now insert any SIM card and the phone should turn on normally

10:The phone is now unlocked and you can customize the setting as you like

published by: www.unlock4mobile.blogspot.com

LG unlocker

Unlock for all new LG U990/KU990/KU380/CU400/CU405/CU500/CU500V/
CU320/TU500/TU550/MU500/MU550 ........ and more
maybe it will work with KS20 or KU580 model

Download Mirror:
http://rs174.rapidshare.com/files/109187754/new_lg_unlock.rar

published by: www.unlock4mobile.blogspot.com