BM622 2010 CHANGE MAC GLOBE WIMAX

BM622 2010 CHANGE MAC

start > run > cmd > telnet 192.168.1.1
username:wimax
password:wimax820
setallmacaddr (mac address here)
setserialnum (18 digits serial here)
restoredef

_____________________________________________

BM622 2011 CHANGE MAC

1.PLUG YOUR MODEM IN TO THE COMPUTER W8 UNTIL CONNECTED TO YOUR PC
2.ENABLE MUNA NATIN TELNET SA ADMIN..
3.OPEN BM622 DECODER ,,,,,< d0wnl0@d nyo nasa baba bm622>
4.OPEN BROWSER TYPE 192.168.1.1 (ENTER) LOGIN: ADMIN PASS: UNG NA GENERATED NG BM622 DECODER
5.PAG PASOK NA SA ADMIN... PUNTA SA ACL TAPOS CHECK UNG TELNET SA LAN THEN APPLY.. (TELNET NA TAU)
6.GO TO CMD TYPE TELNET 192.168.1.1 THEN ENTER
7.LOGIN: Firefly PASS: $P4mb1h1r4N4m4nT0!! then enter
ATP>display allmacaddr (show base mac )
Current WAN Mac:XX:XX:XX:XX:XX:XX
Current Lan Mac:XX:XX:XX:XX:XX:XX
ATP>xiugai allmacdizhi XX:XX:XX:XX:XX:XX (input d2 present mac na lalagay mo ) hen enter
WAN MAC ADDRESS UPDATE SUCCESS xx:xx:xx:xx:xx:xx
LAN MAC ADDRESS UPDATE SUCCESS xx:xx:xx:xx:xx:xxX
ATP>restoredef (enter)

_______________________________________________

BM622i 2010 CHANGE MAC

Login wimax
Passwordwimax820
ATPdiag set macaddr XXXXXXXXXXXX
set Lan mac address success
Lan mac address updated XXXXXXXXXXXX
set Lan Mac address Sucess
Wan mac address updated XXXXXXXXXXXX
ATP diag restore default

______________________________________________

BM622i 2011 CHANGE MAC


1st po d0wnl0@d nyo to...

2nd: connect nyo bm622i nyo sa pc
3rd run nyo yung firmware upgrader pero wag nyo po i upgrade..yaan nyo lang nakaopen..
4th: go to>start>run>cmd tpos type nyo telnet then enter
5th: after type nang telnet type nyo o 192.168.254.1
6th: LOGIN: Firefly PASS: $P4mb1h1r4N4m4nT0!! then enter
7th: ATP>xiugai macdizhi XX:XX:XX:XX:XX:XX (yan po yung mac na ilalagay nyo)
8th: ATP>diag restore default
________________________________________________


for VIP MAC
Change nyo lang ang domain name nya and frequency nya..

Xensa na (^^^)

Ok na free d0wnl0@d na xa.. la nman password...!

Read More

How to Change Mac Address of Huawei Wimax bm622i 2011

Credits sa may akda.

Here's how to change mac address of huawei wimax bm622i 2011
Finally revealed
Follow Steps below

Click start menu
Run
type cmd
type telnet


type o 192.168.254.1



Login : Firefly
Password : $P4mb1h1r4N4m4nT0!!
Type xiugai macdizhi 00:1E32:B2:32
Next type diag restore default



Before 



After



Check your Wimax Gui Site
User : user
Password : 0SlO051O

Done! 
Goodbye 2011
Credit to the discoverer

LETS SAY GUYS HAYAHAY!!

Read More

BM622i Mac Changer Tutorial

This tutorial is for how to change your Mac address to your BM622i WiMax unit.

Also Read: Clone WiFi Hotspot via Repeater 

 

First, You need a working Mac changer! I had use the McDonalds software created in Symbianize Community (credits to the creator). Download the application to change the Mac of BM622i.

Download here: [ BM622i Mac Changer ]

Install and Launch the program

Cancel the Upgrade Notification

Enter the desired Mac address

Pop box come out (wait till finish)

 

Another Pop out to your browser

Use the encircle below for Username & Password

Log in Now go to http://192.168.254.1/

It takes about 10 minutes before it will totally connected.

(But be sure that the Mac address you enter is working to your area)

Read More