v360/ L7 unlock without TP

v360/ L7 unlock without TP !! For Bootloader 08.A0 !!
( for other bootloader change the bootloader version on all flash files )

1:
charge your battery to full and flash using this flash file yuet 2.2.1 MP

DownLoad:
http://pickup.mofile.com/2742710934734278

and make shure your motorola drivers are working fine. DURING
THE ENTIRE PROCESS YOU MUST HAVE RSD LITE 3.5 RUNNING

DownLoad:
http://rapidshare.com/files/22418329/RSD_LITE_3_5.zip

2: run RSD Lite. download program P2K Easy Tool 3.9

DownLoad:
http://rapidshare.com/files/21542369...39_cracked.rar

password: cafe.mobil.hr

run the p2k easy tool and choose your mobile phone ( our case v360 )
and choose " Flash " Flash.SHX and flash with file
"R4513_G_08.B7.DAR_RB_Lang0031_reflash_MOTOx.s hx

DownLoad:
http://www.4shared.com/file/12254449...nlockMoto.html
wait for program to end process.

3: on the same program (p2k easy tool) go to " Repair " tab
and select " Full Repair PDS Zone but first unplug phone and
take your battery out of the phone AND LEAVE IT OUT.
and plug it back to phone. You will get an error like this
" Phone failed initial security verification checks. HAB error
0x27 " ignore it and press OK.

if you didnt get the error message you didnt run the RSD Lite.
Now on p2k easy tools click the " Do Selected Jobs ".
you will get message " Please disconnect testpoint
( if you not made this already) " click OK, wait for program
to complete the task.

4: do not put battery back into the phone. now on p2k eays
tool go to " Locks " and select " Unlock SP " and again
unplug the cable from phone and plug it back in without battery.

you get error message like in step 3 " Phone failed initial
security verification checks. HAB error 0x27 " ignore it and
press OK. and click " Do selected jobs ".

you get a message " Please disconnect testpoint
( if you not made this already) " click OK.

5: now go to " Repair " and click " Full repair PDS zone "
and unplug the phone and plug it back again without the
battery you get error "Phone failed initial security verification
checks. HAB error 0x27"
click OK. press button " Do selected jobs " again " Please
disconnect testpoint ( if you not made this already) " click OK.

6: download program Flash&Backup3.0.053

DownLoad:
http://www.esnips.com/doc/97e76f2f-4...51/fb3installl

start the program and on top of the programs window you see
Active Phone Profile: choose R4513_v360_08.A0. go to " Write Data "
and choose ( button Select file ) and select first flash
file Yuet 2.2.1

now mark only the CG3, CG 7, CG18 ( leave tick/checkmark
only on cg3, cg7, cg18 ) NOW UNPLUG THE CABLE FROM PHONE
AND PUT THE BATTERY BACK INSIDE AND WITH BATTERY INSIDE PLUG
THE CABLE IN

error message " Phone failed initial security verification checks.
HAB error 0x27 " click OK. click " Write Data " now the phone is
unlocked and has a yuet 2.2.1 monster pack.

published by: www.unlock4mobile.blogspot.com

Posted in: Motorola